Spring Repair in Dallas, TX

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as $59/month*on approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Spring Repair in Dallas, TX

When your garage door won’t lift or makes a sharp, gunshot-like crack, you are likely looking at a broken torsion or extension spring. A garage door is essentially 200 pounds of steel riding on two springs, and when one snaps, the door becomes a dead weight that your opener simply cannot lift safely. At Otto’s Garage Door, we handle spring replacement daily across Dallas, from the older homes in Lakewood to the newer builds in Preston Hollow. If you are stuck in your garage, call (972) 736-9689. I answer the phone personally, often even at nine in the evening, and I can give you an honest quote right then and there. We specialize in getting doors moving again, which is the core of our Garage Door Repair in Dallas service.

Since 2004, I have been fixing doors across this county, and I have learned that Dallas weather is hard on metal components. We deal with extreme heat in the summer that dries out lubricants, followed by sudden temperature drops that make metal brittle. If your door is struggling, our Garage Door Repair services can help before a total failure. A spring that is about to snap puts immense strain on your motor and cables, often leading to a much more expensive repair bill down the road. We are locally owned and owner-operated, meaning the name on the van is the same one you will see on the invoice, and I stand by every spring change with my 90-Day Done Right Promise.

When You Need Spring Repair

You don’t need to be a mechanic to know when a spring has failed. The symptoms are almost always immediate and obvious. If you notice any of these signs, stop trying to force the door open, as you risk burning out your opener motor or snapping a cable.

• The Loud Bang: If you heard a noise like a gunshot or a heavy firecracker go off in your garage while the door was closed, that was a spring snapping. It releases a tremendous amount of stored energy instantly.
• Door Won’t Move: You press the button, the motor hums or struggles, but the door barely moves an inch. This happens because the opener is trying to lift the full weight of the door without the counter-balance of the springs.
• Visible Gap in the Coil: If you look at the spring above your door and see a clear separation or a two-inch gap in the metal coils, the spring is broken.
• Crooked Lift: If the door goes up crooked or feels extremely heavy when you try to lift it manually, one spring may have failed while the other is still holding on, causing an uneven load.
• Cable Slack: When a spring breaks, the cables often lose their tension. If you see cables hanging loose or tangled near the drums, do not touch them, as they are under high tension.

If you see these signs in your driveway in Dallas, give me a call at (972) 736-9689. I can usually get out to your place to swap those springs out quickly, so you aren’t stuck with your car trapped inside.

Our Spring Repair Process

I don’t believe in “dispatching” someone to your house. When you call Otto’s Garage Door, you are talking to the person who will be standing in your driveway. Here is how I handle a spring replacement safely and correctly.

1. Initial Assessment: I inspect the entire door system, not just the broken spring. I check the cables, the rollers, and the opener to ensure the spring failure didn’t cause collateral damage to other parts.
2. Securing the Door: I lock the door in the down position or use specialized clamps to ensure it cannot fall or move while I am working. High-tension springs are dangerous, and I never cut corners on safety.
3. Removing the Old Hardware: I carefully unwind the tension from the broken spring using the proper winding bars. I never use makeshift tools, as this is how accidents happen.
4. Installing Correctly-Sized Springs: I measure your door’s weight and height to ensure the replacement spring is an exact match. I use high-cycle, oil-tempered springs that are built to last longer than the standard ones often found on builder-grade doors.
5. Tensioning and Balancing: Once the new springs are installed, I wind them to the precise tension required for your door’s weight. I test the door manually to ensure it balances perfectly at the halfway point.
6. Final Safety Check: I run the door through several full cycles with the opener to ensure it is smooth, quiet, and that the auto-reverse safety features are functioning correctly.

I count spring cycles the way you count tire miles. I will tell you exactly what kind of lifespan you can expect from the new springs based on how often you use your door. We serve the home and the community with honest, upfront work.

Spring Repair Pricing in Dallas

I believe in upfront pricing that doesn’t change from the phone to the driveway. I don’t use high-pressure sales tactics or “bait-and-switch” pricing. The cost depends on the weight of your door and the type of spring required (standard torsion vs. high-cycle), but see How Much Does Garage Door Repair Cost? (2026 Price Guide) - Dallas, TX for what you can generally expect in this market.

We offer a $40 discount on any repair over $200. If you are a senior or a veteran, you get an additional 10% off-always. We also provide a free second opinion on any written estimate you have received from another company. If you aren’t sure if you are being quoted a fair price, call (972) 736-9689 and describe the estimate to me. I will tell you straight if it’s a fair deal or if you’re being overcharged.

FAQs - Spring Repair

Can you fix my garage door today?

Yes, I prioritize spring repairs because I know how frustrating it is to have your car trapped in the garage. Call (972) 736-9689 as soon as you notice the problem, and I will do my best to get to your home in Dallas the same day.

Is it cheaper to repair or replace the garage door?

If the only issue is a broken spring, it is almost always much cheaper to repair the spring than to replace the entire door system. Springs are a wear-and-tear item, like tires on a car, and replacing them restores the door to perfect working order.

Do I need to replace both springs if only one is broken?

I strongly recommend replacing both springs at the same time if your door uses a pair. Springs are usually installed at the same time, meaning they have gone through the same number of cycles; if one has snapped, the other is likely just a few weeks or months away from failing.

Are your springs better than what came with my door?

We use high-cycle, oil-tempered springs that are significantly more durable than the standard springs installed by many home builders. My goal is to fix it once so you don’t have to worry about it again for a long time.

When you need a professional who treats your home like their own, give me a call-even for Track Realignment or any other issue. We are fully insured and bonded, and we carry the name Otto’s Garage Door because I stand behind every single turn of the wrench. Whether you have a Clopay, Amarr, or Wayne Dalton door, I have the parts and the experience to get it done right the first time.

Written by Otto Reinhardt, Owner at Otto’s Garage Door, serving Dallas since 2004.